Panels
are completely reversible. Simply place the active panel (x) left hand
or right as desired, with the interlock facing outside. To change the
panel arrangement at any time, remove the panels and flip them over. This
will reverse their respective positions. Re-mount the panels & reverse
the pullstile hardware. Adjust rollers here if necessary. (note: Roller
wheels located at either end of the moving panel, and the “twin-sill”
design of the fixed panels allow the door handing to be changed easily
at anytime after the initial installation)
Patio
Screen Door Installation Instructions
Featuring One-Piece Rigid Construction
STEP
1 To install screen door on upper and lower tracks, first place wheels
on upper track. Retract spingloaded lower wheels and slip over lower tract,
then release. Tighten wheel adjustment screws so that screen operates
smoothly without binding.
STEP 2 To install striker on door jamb. Adjust so that the hook in the latch assembly rides over the strike and latches without having to use the lever. Secure the strike with second screw. NOTE: Some applications require the door handle to be installed on the right hand side. The door can be rotated, but the striker must be installed “upside down” as shown in fig. 2b LOCKING INSTRUCTIONS: Door may be locked from the inside by turning the button a quarter turn to the horizontal position. To release lock return button to the vertical position.